- Track your orders
- Save your details for express checkout
DECMIG523P
The JOB 523P LAB multiprocess inverter welding generator meets professional and specialist welding needs and is guaranteed by the LAB mark of excellence.
Welding, Heating and Joining, Welding Machines
It allows to weld in Synergic MIG / Manual MIG / MMA / TIG Lift with great precision.
The JOB 523P LAB model is specifically designed for the needs of bodywork welding.
The control of the generator is very simple and intuitive. In a few steps you can set up the necessary work. A different welding program is assigned to each of the two torches. In this way the welding machine is ready for use with two different materials: for example, steel and alloy for copper silicon.
Each torch is connected to its own 4 roller wire feed unit, reel for wire reels with a diameter of 200 - 300 mm and up to two different protection gases.
The JOB 523P LAB is extremely flexible and easy to use: in synergic MIG mode over 50 programs are preloaded for welding many metals and alloys such as: steel, stainless steel, aluminum and brazing with copper silicon or copper aluminum wires, etc.
Through the SD card it is always possible to update and add new programs. The microprocessor memory also allows you to save customized programs as well.
MIG welding can be set in PULSED or DOUBLE PULSED mode for particular processes or on thin thicknesses where it is important to reduce the heating of the piece and minimize welding spatter.
The JOB 523P LAB can also be used in MMA mode to weld rutile and basic coated electrodes and in TIG Lift mode it is perfect for precision work.
The structure of the generator is designed thinking of the needs of the coachbuilder and is treated in detail such as, for example, support for the various torches, sturdy rubber wheels, etc.
The Job 523P LAB model delivers 200 Amps in direct current. The power supply voltage is single-phase at 230 Volt.
The main features of the JOB 523P LAB are:
MIG
Secondary MIG parameters
MMA
TIG
Welding current range (Amp): | MIG/MAG, TIG: 10 - 200A MMA: 10 - 160A |
---|---|
Duty Cycle (Amp) (EN 60974-1 40°C): | MIG/MAG: (200A - 25%) - (140A - 60%) MMA: (160A - 30%) - (130A - 60%) TIG: (200A - 30%) - (140A - 60%) |
Open circuit voltage (Volt): | 85V |
Input voltage (50/60 Hz) : | 1 Ph - 230V |
Absorbed power 60% / Max: | 3,0 / 6,0 kW |
Fuse (Amp): | 25A |
Wire MIG MAN/SYN: | : |
Steel wire (Ø mm): | Ø 0,6 - 0,8 - 1,0 mm (Sg2 Sg3) |
Stainless steel wire (Ø mm): | Ø 0,8 - 1,0 mm (AISI ER308 / ER316 / ER309) |
Al.Mg wire (Ø mm): | Ø 0,8 - 1,0 - 1,2 mm (5%) |
Al.Si wire (Ø mm): | Ø 1,0 - 1,2 mm (5%) |
Cu.Si 3 - Cu.Al 8 wire (Ø mm): | Ø 0,8 - 1,0 - 1,2 mm |
Wire Suitable Spool: | Ø 200 - 300 mm x 2 |
ELETCTRODES : | : |
Rutile: | Ø 1,6 - 4,0 mm |
Basic: | Ø 1,6 - 4,0 mm |
TIG: | Ø 1,0 - 4,0 mm |
Wire feeder: | 4 rollers x2 |
Output connection: | DX 25 mm2 / Euro |
Thermostatic Protection: | yes |
Weight kg ≅: | 48,5 |
Dimensions (mm): | 860 x 560 x 1000 |
FEATURES: | : |
Pulsed welding: | MIG/MAG |
Double pulsed welding (PULSEX2): | MIG/MAG |
Electronic inductor: | MIG/MAG - Adjustable |
Wire loading: | MIG/MAG |
Purge: | MIG/MAG |
2T / 4T: | MIG/MAG |
Burn back: | MIG/MAG - Adjustable |
Hot start: | MIG/MAG, MMA - Adjustable |
Wire approach speed: | MIG/MAG - Adjustable |
Arc Force (MMA): | Adjustable |
Anti-sticking (MMA/TIG): | yes |
TIG Lift (Torch with gas valve): | yes |
Spool Gun: | MIG/MAG |
Potentiometer torch: | MIG/MAG Autosetting |
Ammeter / Voltmeter: | yes |
SD Card reader: | yes |
Program saving: | MIG/MAG: 16 |
LOGISTIC INFO CODE: | 250800 |
Barcode: | 8011399034301 |
Package dimension, Wid.-Dep.-Height (mm): | 795 x 300 x 830 |
Package weight kg: | 55.5 |
Pieces for pallet: | 4 |