- Track your orders
- Save your details for express checkout
DECMIG522P
Deca Job522 Inverter Mig Welding System
Welding, Heating and Joining, Welding Machines
The JOB 522P LAB multiprocess inverter welding generator meets professional and specialist welding needs and is guaranteed by the LAB mark of excellence. Designed and built with care at our San Marino factories.
It allows to weld in Synergic MIG / Manual MIG / WIRE No Gas / MMA / TIG Lift with great precision. The control of the generator is simple and intuitive while offering all the performances and adjustments of a professional welding machine.
It is extremely flexible: in synergic MIG mode, programs for welding many metals and alloys such as: steel, stainless steel, aluminum and brazing with copper silicon or copper aluminum wires are preloaded.
MIG welding can be set in PULSED or DOUBLE PULSED mode for special processing or on thin thicknesses where it is important to reduce the heating of the piece and minimize welding spatter.
Through the SD card it is possible to update and add new programs. The microprocessor memory also allows you to save customized programs as well.
In MMA mode it allows the welding of rutile and basic coated electrodes.
In TIG Lift mode it is perfect for precision work.
The body is designed with professional users in mind and with attention to detail such as, for example, sturdy rubber wheels, torch holder, accessories compartment, etc.
The JOB 522P LAB model delivers 200 Amps in direct current. The power supply voltage is single-phase at 230 Volt.
The main features of the JOB 522P LAB are:
- Ammeter / Voltmeter: for easy adjustment.
MIG
- Robust 4 roller wire feeder diameter 37 mm.
- Gas test function: to check the operation of the pressure reducer without advancing the wire.
- Wire loading function: to easily load the wire into the torch without gas outlet.
- Coil housing diameter 100 - 200 mm.
- Synergic or manual regulation.
- Preloaded programs for many materials.
- SD Card Reader: to update programs and add new ones.
- Personal program memory.
- Inductance Adjustment: This value can be adjusted to reduce weld spatter.
- Adjustable: Burn Back, Hot Start, Wire approach speed.
- Welding modes: 2T / 4T / spot / stich.
- Predisposition for use of spool gun or potentiometer torches.
MMA
- Adjustable Arc Force: to obtain an optimal welding with each electrode it is possible to adjust the temporary increase of the current when the electric arc becomes short.
- Adjustable Hot Start: to obtain an optimal arc ignition with each electrode it is possible to adjust the increase of the initial current.
- Anti-sticking: allows you to easily detach the electrode if it remains glued to the piece.
TIG
- TIG LIFT: arc striking occurs by touching the piece with the electrode and slowly lifting it. The risk of contaminating the workpiece with the tungsten electrode is small.
- Automatic Slope up: progressive increase of the welding current to obtain a flawless start of the welding seam.
| Welding current range (Amp): | MIG, TIG: 10 - 200A MMA: 10 - 160A |
|---|---|
| Duty Cycle (Amp) (EN 60974-1 40°C): | MIG: (200A - 25%) - (140A - 60%) MMA: (160A - 30%) - ( 130A - 60%) TIG: (200A - 30%) - (140A - 60%) |
| Open circuit voltage (Volt): | 85V |
| Input voltage (50/60 Hz) : | 1 Ph - 230V |
| Absorbed power 60% / Max: | 3 / 6 kW |
| Fuse (Amp): | 25A |
| Wire MIG MAN/SYN: | : |
| Steel wire (Ø mm): | Ø 0,6 - 0,8 - 1,0 mm (Sg2 Sg3) |
| Stainless steel wire (Ø mm): | Ø 0,8 - 1,0 mm (AISI ER 308 / ER316 / ER309) |
| Al.Mg wire (Ø mm): | Ø 0,8 - 1,0 - 1,2 mm (Al.Mg 5) |
| Al.Si wire (Ø mm): | Ø 1,0 - 1,2 mm (Al.Si 5) |
| Cu.Si 3 - Cu.Al 8 wire (Ø mm): | Ø 0,8 - 1,0 - 1,2 mm |
| Self shielded wire (mild teel) (Ø mm): | Ø 0,6 - 0,9 - 1,2 mm |
| Wire Suitable Spool: | Ø 200 - 300 mm |
| ELETCTRODES : | : |
| Rutile: | Ø 1,6 - 4,0 mm |
| Basic: | Ø 1,6 - 4,0 mm |
| TIG: | Ø 1,0 - 4,0 mm |
| Wire feeder: | 4 rollers |
| Output connection: | DX 25 mm2 / Euro |
| Thermostatic Protection: | yes |
| FEATURES: | : |
| Synergic welding: | MIG/MAG, NO GAS |
| Pulsed welding: | MIG/MAG, NO GAS |
| Double pulsed welding (PULSEX2): | MIG/MAG, NO GAS |
| Electronic inductor: | MIG/MAG, NO GAS - Adjustable |
| Wire loading: | yes |
| Purge: | yes |
| Pregas - Postgas: | MIG/MAG, NO GAS |
| 2T - 4T / Spot / Stich: | MIG/MAG, NO GAS |
| Burn back: | Adjustable |
| Hot Start: | MIG/MAG, NO GAS, MMA - Adjustable |
| Wire approach speed: | Adjustable |
| Arc Force (MMA): | Adjustable |
| Anti-sticking (MMA/TIG): | yes |
| TIG Lift (Torch with gas valve): | yes |
| Spool Gun: | yes |
| Potentiometer torch: | MIG/MAG, NO GAS: Autosetting |
| Ammeter / Voltmeter: | yes |
| SD Card reader: | yes |
| Program saving: | 16 |
| Weight kg ≅: | 30 |
| Dimensions: | 790 x 400 x 790 |
| LOGISTIC INFO CODE: | 250700 |
| Barcode: | 8011399034295 |
| Package dimension, Wid.-Dep.-Height (mm): | 790 x 300 x 655 |
| Pieces for pallet: | 8 |
Questions?
Thank you for your interest.
Please enter your details and the document will be emailed to you immediately.
